PIR sensor LED Flood Light 20W EPISTAR for Entrance / Walkway /
1. LED Flood Light with PIR Montion sensor.
2. 140° sensing Angle
3. Die-Casting Aluminum Body, Tempered glass, Stainless Steel
4. 6-8 metres sensing distance
5. No UV or IR radiation
6. 3-4 meters sensing hight.
|Optical Parameters||LED Power:||1x20W||System Consumption||20 W|
|LED Chips||EPISTAR||LED Initial Flux||2200 lm|
|THD||<20%||LED Maintain Flux (After the lens & thermal stabilization)||1360 lm|
|Colour Rendering Index (CRI)||Ra > 72||Illumination Pure White 6500K||Mount Height=2M: 62.15 lux Mount Height=3M: 27.62 lux Mount
Height=5M: 9.94 lux Mount Height=6M: 6.91 lux|
|Light Distribution Curve||Rectangular Facular||Illuminance Uniformity||>80%|
|Colour Temperature||6000K-6500K||Sensing Angle||140°|
|Electrical Parameters||Input Voltage||90-240VDC||Sensing Distance||6-8 meters|
|Power Factor||>0.95||output voltage||29-36VDC|
|Frequency Range||50-60HZ||Lamp Efficiency||>0.82|
|Power Efficiency||>90%||Non Dimmable||(Not dimming)|
Dimming can be done according to the requirements
|Fitting Parameters||Colours||Black or Grey (Subject to availability)||Packing||16 PCS/62*40*26CM /17KGS/CTN|
|Materials||Aluminium Body Tempered glass Stainless Steel Screws||Working Environment||Temp: -20℃~45℃ Humidity: 10% ~90%|
|Working Life-span||50,000 hours||Storage Environment||Temp: -20℃ ~50℃|
1. The light’s waterproof grade is IP65, able to withstand rains,
but it can’t work under water.
2. The light’s operating at working temperature between -20℃ and
3. Make sure the products are out of reach from children,
4. Please don’t install in flammable ,explosive or corrosive
5. Cut off power supply before and in installation process. If the
product is damaged due to mal-operation, it will invalid the
1. Can be mounted vertically or horizontally, adjustable stand lets
you point the light at different angles.
2. Perfect for outdoor project lighting of Building exterior wall,
parking lot, stadium, bridge, gardens, square and many other